DEHN SURGE PROTECTION DEVICES In Noida faridabad Gurgaon Gurugram Delhi Dehradun RISK ANALYSIS AGAINST LIGHTNING & adequecy study for LPS in Noida faridabad Gurgaon Gurugram Delhi Dehradun Design Solution for lightning protection system In Greater Noida faridabad Gurgaon Gurugram Delhi Dehradun surge protection for power supply / Earthing Solutions in Greater Noida faridabad Gurgaon Gurugram Delhi Dehradun inspection / certification of lightning protection system in Noida faridabad Gurgaon Gurugram Delhi Dehradun lightning protection work shop Noida faridabad Gurgaon Gurugram Delhi Dehradun Safety equipment Greater Noida faridabad Gurgaon Gurugram Delhi Dehradun Chemical Earthing in Noida faridabad Gurgaon Gurugram Delhi Dehradun Supplier of Chemical Earthing in Noida faridabad Gurgaon Gurugram Delhi Dehradun Earthing Dealer in Noida faridabad Gurgaon Gurugram Delhi Dehradun Earthing manufacturer Noida faridabad Gurgaon Gurugram Delhi Dehradun GI Earthing Electrode Supplier in Noida faridabad Gurgaon Gurugram Delhi Dehradun we supply Transformer and Generator set Special and cost effective solution of earthing CPRI testes Earthing Electrode An earthing transformer (neutral coupler) is a three-phase transformer connected to the power system to provide a neutral connection for earthing, either directly or via impedance. The earthing transformersmay in addition supply a local auxiliary load. Theearthing transformer creates a neutral point for a network. Simply put, a grounding transformer is used to provide a ground path to either an ungrounded “Y” or a delta connected system and are used to…. Provide a relativelylow impedance path to ground, thereby maintaining the system neutral at or near ground potential A grounding transformer or an earthing transformer is used to provide a ground path to either an ungrounded way or a delta-connected system. Uses: It provides a relatively low-impedance path to ground, thereby maintaining the system neutral at or near ground potential. Due to its composition, a zigzag transformer is more effective for grounding purposes because it has less internal winding impedance going to the ground than when using a wye-type transformer. In ungrounded systems, it's still necessary to detect a ground fault. Transformer Star and Star Connections. The voltage between any line of the three-phase transformer is called the “line voltage”, VL, while the voltage between any line and the neutral point of a star connected transformer is called the “phase voltage”, VP.